REACTING TO A SUDDEN HOT WATER SYSTEM SHUTDOWN: PRO GUIDANCE

Reacting to a Sudden Hot Water System Shutdown: Pro Guidance

Reacting to a Sudden Hot Water System Shutdown: Pro Guidance

Blog Article

Book

We have noticed this article on How to Troubleshoot and Repair an Electric Water Heater down the page on the web and decided it made sense to write about it with you on my blog.


No Hot Water — Water Heater Repair
Lots of modern-day houses make use of an electric water heater for their heating unit, due to its benefit and also ease of use. Nevertheless, just like any other electric appliances, problems might arise with its usage, all of a sudden. It can be actually aggravating to awaken to a cold shower as opposed to a warm one or having your bathroom with water that isn't hot adequate or even as well hot. Whatever the instance might be, water heater issues can be quite stressful. The good news is, we've made a checklist of feasible remedies to your hot water heater problems. There are a variety of elements that can trigger much of these problems, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you turn off the main power supply for security. Whatever the trouble is, getting it repaired must not posture too much of an issue if you comply with these actions:

Call A Specialist:


If after changing all damaged components and also resetting your temperature, the hot water heater still isn't functioning, you might require to call a professional plumber for a professional opinion. The trouble with your heating system could be that the hot and cold taps have actually been changed or it may be undersized for the amount of hot water needed in your house. Whatever the case might be, a specialist plumber would certainly aid fix the trouble.

Check Your Power Supply:


As standard as this might seem, it is extremely essential. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the concern, merely transform it off and on once more. Replace any type of busted or worn-out fuse. Evaluate the appliance with power after these changes to see if it's now functioning.

Examine Your Thermostat:


If your hot water heater still isn't working or the water appearing isn't warm enough, you might require to examine the temperature level settings on your top thermostat. Ensure the breaker is turned off before doing anything. Open the accessibility panel and press the red switch for temperature reset above the thermostat. This should aid heat the water. Transform the circuit breaker back on as well as inspect if the trouble has been fixed.

Inspect the Heating Element in the Water Heater:


If it's not a power problem, then try looking into your burner if it is still working. Evaluate each of your heating elements to ensure the trouble isn't with any one of them. If any of them is faulty, replace that component and after that examine whether the hot water is back on.

Final thought


Hot water heater issues are not constantly major. A lot of them are due to minor issues like a blown fuse or damaged burner. Replacing the damaged parts should suffice. Nevertheless, if you are still not able to fix the issue, give a call to your nearest plumber ahead to get it fixed.


What Would Cause My Electric Water Heater to Stop Working?


Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.



To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.


Basic Water Heater Troubleshooting


Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.



If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.



If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.



When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.


Conduct Advanced DIY Water Heater Troubleshooting


If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.



Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:


The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.



If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.



The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.



While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.



Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.



While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.

https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working


No Hot Water — Water Heater Repair

As a keen person who reads on Hot Water Heater Repair, I assumed sharing that article was important. Liked our write up? Please share it. Help another person check it out. We cherish reading our article about How to Troubleshoot and Repair an Electric Water Heater.


Act before it's late!

Report this page